This video from the 2022 NCC Seminars discusses Part H1D7 Roof and wall cladding from NCC 2022 Volume Two.

Transcript

0:00

[Music]

0:10

My name is Phil Finnimore from the Australian  Building Codes Board, today I'm going to talk to  

0:15

you about a particular part in the roof and  wall cladding section of Volume Two NCC 2022.

0:24

H1D7 roof and wall cladding, what I'd like to  point out in this is the solutions relating to  

0:32

gutters and downpipes. If you have a look on the  right there through those relevant  

0:38

Australian Standards 1562.1, 2050 and 3500.3 you'll  find solutions for gutters and down pipes. Also, on  

0:48

the left is a Deemed-to-Satisfy set of solutions  that are contained within the Housing Provisions  

0:54

for NCC 2022, if that's the DtS solution that you  choose. So specifically we're talking about 

1:01

clause H1D7 of Volume Two which will take you through  H1D7(4) subclause (b) to Part 7.4 of the Housing Provisions

1:13

for solutions for gutters and downpipes. But before we move into that and talk  

1:19

about the detail I'd like to point out that the  Housing Provisions, which is different to NCC 2019, 

1:26

we've excluded the provision of box gutters  in those Deemed-to-Satisfy solutions.

1:33

There are solutions for box gutters but they exist  in 3500.3, the only thing that 2019 talks  

1:41

about in terms of box gutters is the requirement  for a fall and then it sends you across to 3500.3.

1:48

So a decision was made for 2022 in  the Housing Provisions to exclude box gutters  

1:53

entirely so that the complete solution is  in that reference document 3500.3.

2:02

There were only a few changes to this  particular set of technical DtS provisions  

2:08

in the Housing Provisions for 2022  and I'll point those out to you now.

2:13

The first one is a change in  terminology from 2019 to 2022, which is  

2:20

described there we've gone from the average  recurrence interval to annual exceedance probability

2:27

it's a defined term and this term  has been changed to a line with 3500.3.

2:32

Along with the data for rainfall intensity, so if  we're looking at these particular tables and this  

2:38

one is for the Australian Capital Territory, you'll  note that there are differences in those rainfall  

2:43

intensities this is based on weather bureau data  and it's also aligned with the review of 3500.3

2:51

to maintain consistency between the code and  the relevant Australian Standard. For 2022 on the  

2:59

Housing Provisions we've expanded a little bit  for valley gutters in the part relating to the  

3:07

installation of gutters specifically clause  7.4.4, we provided in there a little bit more  

3:13

detail through subclause (4) about dimensions and  the pitch relevant tables things like free board  

3:21

set out in subclass (c) there and side angles. And  what we've done to support this is provided tables  

3:28

with different rainfall intensities which will  give you different dimensions across those  

3:33

three columns for effective depth and width, and  supporting that also is explanatory information  

3:39

which sets out in profile in an illustrative way  what those table dimensions actually relate to.